Interface Related Features

Interface Features — cont.

Host Transmission Buffers

Specifies the number of host transmission(s) that may be buffered. By buffering data from a bar- code, the scanner can continue to read a new barcode while the old one is being transmitted to the host. Selecting BUFFERS = 1 means that the first barcode must be transmitted before a new one can be read. A selection of BUFFERS = 2 means that a new barcode can be read while data from the first barcode is transmitted.

When a DISABLE SCANNER command is received from the host, the scanner will continue to transmit all data that is buffered.

START / END

PROGRAMMING BARCODES

Host Transmission Buffers = 1

Host Transmission Buffers = 2

DEFAULT

3-8

Magellan® 1000i

Page 34
Image 34
Datalogic Scanning 1000I manual Interface Features, Host Transmission Buffers