Datalogic Scanning DS4300 manual Junction box mounting

DS4300 DATALOGIC

The junction box is designed to be mounted to a panel of metal, plastic or other appropriate material using the mounting screws provided in the package. To do this:

1)Open the junction box by unscrewing the 4 cover screws.

If necessary, using the two mounting holes inside the junction box as a pattern, mark the panel with an appropriate object and then drill two small pilot holes in the panel.

2)Align the junction box and insert the two self-threading screws with their washers and screw them into the panel until tight (see Figure 2.5).

Figure 2.5 - Junction box mounting

2.4- Installation