GUIDE TO INSTALLATION
The following can be used as a checklist to verify all of the steps necessary for complete installation of the DS4300 scanner.
1)Read all information in the section "Safety Precautions" at the beginning of this manual.
2)Correctly position and mount the scanner for barcode reading according to the information in paragraphs 2.2, 2.5 and 3.4.
3)Provide correct system cabling according to the signals necessary for your application (see the applicable
4)Install the Configuration Disk.
Upon successful completion of the installation, the readme.hlp file is opened, giving details about how to get started configuring your scanner. See also the Guide to Rapid Configuration link.
Specific parameter details are available in the Help On Line.
NOTE
Fine tuning of the scanner position for barcode reading can be accomplished using the Test Mode as described in WinHost.
The installation is now complete.
v
