DATALOGIC | DS4300 |
Electrical connection is provided through a cable on the side of the reader; this cable is terminated with a
The laser beam output window is on the right hand side of the scanner (Figure A/B, 10 ). A green LED on the same side indicates the laser is active (Figure A/B, 9 ).
A security system allows the laser to activate only once the motor has reached the correct rotational speed; consequently the laser beam is generated after a slight delay from the power on of the scanner.
The four LEDs on the left hand side of the scanner indicate the following:
READY | (red), indicates the reader is connected to the power supply |
| and the startup was successful. If the startup is not |
| successful, this LED blinks. (Figure A/B, 3 ). |
GOOD READ | (red), is used to signal successful barcode decoding. It is |
| also used in Test mode to signal the decoding percentage |
| (for details refer to the section "Test Mode" in the WinHost |
| Help On Line). (Figure A/B, 4 ). |
EXT TRIG | (yellow), indicates external trigger activity (for details refer to |
| par.2.4.4. (Figure A/B, 5 ). |
TX DATA | (green), indicates data transmission on the main serial |
| output line. (Figure A/B, 6 ). |
The screw holes on the body of the reader are for mechanical fixture (Figure A/B, 2 ); the screw holes shown in Figure A/B, 11 are to attach accessories such as the optional 90° mirror.
General Features - 1.3
