Datamax MP NOVA4 DT user manual Replacing the Roller

9. Changeable Parts

9.1 Replacing the Roller

Note:

The pictures shown describe an MP Nova4 DT. The process works just the same for all MP Nova printers.

1. Check that the printer is turned off and open the cover (chapter 4.3 DT or 4.5 TT).

2. Pull the roller and the roller bearing support to the right (use the rubber surface when pulling right).

3. Lift the left-hand end of the roller towards the interior of the printer.

4. Lift out the right-hand end of the roller.

5. Remove the entire roller from the printer.