5. Getting Started
5.3.1 Inserting Media MP Nova4 & 6
7. Lock the roll guide lock (turn the handle clockwise). The roll steering shall guide the roll, but shall not be tight.
! Note:
If the roll guide lock cannot be properly tightened (Note: not too tight), lift the lock upwards, rotate it back half a turn, lower it and retighten.
8. Fold the handle (the print head folds automatically onto the roller).
9. Press the print button a few times until the printer automatically finds the correct position of the media.
Note:
If necessary, make a test printout and auto adjust the media positioning sensor as described in chapter 5.7.
10. If you have an:
MP Nova4 or 6 DT: go to
Test Print, chapter 5.7.
MP Nova4 or 6 DT Peel Off: go to Inserting Media
MP Nova4 or 6 TT: go to Inserting Ink Ribbon, chapter 5.5.
MP Nova4 or 6 TT Peel Off: go to Inserting Media
