![](/images/new-backgrounds/1263669/26366999x1.webp)
9. Changeable Parts
9.2 Replacing the Print Head
Note:
The pictures shown describe an MP Nova4 DT. The process works just the same for all MP Nova printers.
1. Make sure the printer is turned off and open the cover.
2. Check and remember the current lateral position of the print head. 3 mm is the default position.
Note: Only adjustable on
MP Nova 4 DT.
3. Carefully push the print head downwards until the finger nut becomes visible. Unscrew the finger nut.
Note: Take care not to loose the finger nut.