![](/images/new-backgrounds/1263669/26366957x1.webp)
5. Getting Started
5.4 Inserting Media – Peel-Off Kit
8. Close the rewind unit slot by turning the knob counter- clockwise while holding the cylinder and backing paper firmly.
9. Roll the backing paper around the rewind unit by turning the knob counter- clockwise. This increases the tension of the backing paper.
10. Press the print button a few times until the printer automatically finds the correct position of the media.
Note:
If necessary, make a test printout and auto adjust the media positioning sensor as described in chapter 5.7.