DCS 36/48BGB manual Installer Checklist

INSTALLATION

INSTALLER CHECKLIST

❏ Specified clearances main-	❏ Each burner lights satis-	❏ Unit tested and free of
tained to combustibles.	factorily, individually or	leaks.
❏ Verified proper enclosure	with adjacent burner lit.	❏ User informed of gas
ventilation.	❏ Air shutters adjusted.	supply shut-off valve
❏ All internal packaging and	❏ Low flame setting satis-	location.
any adhesive residue	factory.	❏ All radiants are assembled
removed. To remove stub-	❏ Drip pan in place properly	and put in place.
born residue, use rubbing
	and sliding freely.	❏ Check match lighting.
alcohol or a commercially
	❏ Pressure regulator con-	■ PLEASE LEAVE THESE
available adhesive remov-
er.	nected and set for 4.0”	INSTRUCTIONS WITH THE
❏ Removed shipping brack-	W.C. Natural, 11.0” W.C. LP	USER.
	gas.	■ USER, PLEASE RETAIN
ets
❏ Knobs turn freely, bezels	❏ Manual shut-off valve	THESE INSTRUCTIONS
	installed and accessible.	FOR FUTURE REFERENCE.
centered.

NOTE:

If any of the listed items are missing, contact DCS at (888) 936-7872. Please be prepared with your Model #, Serial # and description of item(s) that are missing.

Tag location of

Model # and Serial #

Read all installation instructions in this manual to see if the unit has been properly installed. If not done or done correctly, correct before using the unit.

19