Understanding the Printer Menus 223
NOTE: When you use the USB connection and do not use the wireless connection,
you need to disable the wireless LAN.
USB Settings
Use the USB Settings menu to change printer settings affecting a USB
port.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
USB Port
Purpose:
To change the USB settings on your printer. The change becomes effective
after the printer is turned off and then on.
Valu es:
System Settings
Use the System Settings menu to configure the power saving mode,
time-out time, job log auto print, mm/inch setting, default paper size setting,
and low toner alert setting.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PowerSaver Time
Purpose:
To specify the time for transition to power saver mode.
Options:
Enable* Enables the USB interface.
Disable Disables the USB interface.
Sleep 5min.* Specifies the time taken by the printer before it
enters Sleep mode after it finishes a job.
5–30min.
Deep Sleep 6min.* Specifies the time taken by the printer before it
enters Deep Sleep mode after it goes into Sleep
mode.
1–6min.