Installing the Convertor Board
1.Tighten the screws to secure the convertor board to the computer. Connect the cables to the convertor board.
2.Install:
a.back cover
b.stand
c.stand cover
3.Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.stand cover
b.stand
c.back cover
3.Perform the following steps as shown in the illustration:
a.Slide to release the memory cover from the computer [1].
b.Remove the memory cover from the computer [2].
16
