Dell 3030 owner manual Updating the Bios, To Static IP

Option	Description
	NOTE: This field is only relevant when the Integrated
	NIC control in the System Configuration group is set to
	Enabled with ImageServer and when Client DHCP is set
	to Static IP.
Client SubnetMask	Displays the subnet mask of the client. The default setting is
	255.255.255.255.
	NOTE: This field is only relevant when the Integrated
	NIC control in the System Configuration group is set to
	Enabled with ImageServer and when Client DHCP is set
	to Static IP.
Client Gateway	Displays the gateway IP address for the client. The default
	setting is 255.255.255.255.
	NOTE: This field is only relevant when the Integrated
	NIC control in the System Configuration group is set to
	Enabled with ImageServer and when Client DHCP is set
	to Static IP.
DNS IP Address	Displays the DNS IP address of the cleint. The default setting
	is 255.255.255.255.
Domain Name	Displays the Domain Name of the client.
Advanced	Specifies for Advanced debugging
	• Verbose Mode (Disabled by default)
Table 13. System Logs
Option	Description
BIOS events	Displays the system event log and allows you to clear the
	log.
	• Clear Log

Updating the BIOS

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For laptops, ensure that your computer battery is fully charged and connected to a power outlet

1.Re-start the computer.

2.Go to dell.com/support.

3.Enter the Service Tag or Express Service Code and click Submit.

NOTE: To locate the Service Tag, click Where is my Service Tag?

NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the instructions on screen.

4.If you are unable to locate or find the Service Tag, click the Product Category of your computer.

5.Choose the Product Type from the list.

41