4.Disconnect the camera cable from the camera and remove the camera from the computer.
Installing the Camera
1.Connect the camera cable to the camera.
2.Align the camera into its slot and tighten the screws to secure it to the computer.
3.Install:
a.display bracket
b.system board
c.convertor board
d.WLAN card
e.system fan
f.heatsink
g.speakers
h.
i.VESA bracket
j.memory
k.hard drive
l.optical drive
m.back cover
n.stand
o.stand cover
4.Follow the procedures in After Working Inside Your Computer.
Removing the Microphone
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.stand cover
b.stand
c.back cover
3.Perform the following steps as shown in the illustration:
30
