Dell 3030 owner manual Installing the Memory, Removing the System-Board Shield

4.Pry the retention clips away from the memory module until it pops up. Lift and remove the memory module from its connector.

Installing the Memory

1.Align the notch on the memory-card with the tab in the system-board connector.

2.Press down on the memory module until the release tabs spring back to secure them in place.

3.Place the memory cover back into its place.

4.Install:

a.back cover

b.stand

c.stand cover

5.Follow the procedures in After Working Inside Your Computer.

Removing the System-Board Shield

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.stand cover

b.stand

c.back cover

3.Perform the following steps as shown in the illustration:

a.Remove the screws that secure the system-board shield to the computer [1].

b.Lift the system-board shield from the computer [2].

c.Remove the system-board shield from the computer [3].

17