Dell 3030 owner manual Installing the System Fan, Removing the Power-Switch Board

a.stand cover

b.stand

c.back cover

d.System-board shield

e.VESA bracket

3.Perform the following steps as shown in the illustration:

a.Disconnect the system-fan cable from the system board [1].

b.Remove the screws that secure the system fan [2].

c.Remove system fan from the computer [3].

Installing the System Fan

1.Align the system fan with the heatsink on the computer and tighten the screws to secure it to the computer.

2.Connect the system-fan cable to the system board.

3.Install:

a.VESA bracket

b.system-board shield

c.back cover

d.stand

e.stand cover

4.Follow the procedures in After Working Inside Your Computer.

Removing the Power-Switch Board

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.stand cover

b.stand

c.back cover

3.Peel the tape that secures the power-switch board to the computer. Lift the power-switch board to access the cable.

23