card retention arm
alignment guide
alignment bar
filler bracket
NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.
12Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable connections.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
13Close the computer cover (see page 83), reconnect the computer and devices to electrical outlets, and turn them on.
14Install any drivers required for the card as described in the card documentation.
Adding Parts
73
