Dell 4500, 9N756 manual Rail tabs

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

bPress in the two green rail tabs and pull the first hard drive out of the upper bay.

cGently slide the first hard drive into the lower bay until you hear a click.

dReconnect the power and hard-drive cables to the back of the first hard drive.

11Gently slide the new hard drive into the upper bay until you hear a click.

rail tabs (2)

second hard drive in upper bay

first hard drive in lower bay

hard drive bay

12Connect a power cable to the drive.

NOTICE: Match the colored strip on the cable with pin 1 on the drive.

13Locate the extra connector on the drive cable that is attached to your first hard drive and attach the connector to the second hard drive.

Your computer uses cable-select drive cables, which means that the device connected to the end connector of the drive cable is the master device and the device connected to the middle connector is the slave device. Be sure that the jumper setting on the new device is set for "cable select" (see the documentation that came with the drive for information).

82

Adding Parts