Supported hardware and software | Dell 53-1002116-01 instruction

•Chapter 13, “Configuring Port Mirroring using the CEE CLI,”describes how to configure Port Mirroring.

•Chapter 14, “Configuring RMON using the CEE CLI,” describes how to configure remote monitoring (RMON).

•Chapter 15, “Configuring IGMP,” describes how to configure IGMP snooping on the Dell FCoE hardware.

•Chapter 16, “FCoE configuration using the Fabric OS CLI,” describes how to configure FCoE using the Fabric OS CLI.

•Chapter 17, “CEE configuration management,” describes how to perform the administrative tasks required by the Dell FCoE hardware.

Supported hardware and software

The following hardware platforms are supported in this release:

•Dell M8428-k

Within this manual, any appearance of the term “Dell FCoE hardware” is referring to:

•Dell M8428-k

•Dell FCOE10-24 port blade

•Dell Converged 10GbE Switch Module for IBM BladeCenter

•Dell 2 port 10GbE Converged Network Adapter for IBM BladeCenter

Document conventions

This section describes text formatting conventions and important notice formats used in this document.

Text formatting

The narrative-text formatting conventions that are used are as follows:

bold text	Identifies command names
	Identifies the names of user-manipulated GUI elements
	Identifies keywords and operands
	Identifies text to enter at the GUI or CLI
italic text	Provides emphasis
	Identifies variables
	Identifies paths and Internet addresses
	Identifies document titles
code text	Identifies CLI output
	Identifies command syntax examples

xvi	Dell Converged Enhanced Ethernet Administrator’s Guide
	53-1002116-01

Image 16

Dell 53-1002116-01 manual Supported hardware and software, Document conventions, Text formatting

Contents

Dell Converged Enhanced Ethernet Page Contents Chapter Using the CEE CLI This chapter IP static routes overview Chapter Configuring STP, RSTP, and Mstp using the CEE CLI Chapter Configuring Link Aggregation using the CEE CLI Chapter Configuring Lldp using the CEE CLI Chapter Configuring QoS using the CEE CLI This chapter Chapter Configuring Port Mirroring using the CEE CLI Chapter CEE configuration management Figures Page Tables Page This chapter About This DocumentHow this document is organized Document conventions Supported hardware and softwareText formatting Command syntax conventions Getting technical help Contacting Dell FCoE terminology Introducing FCoEFCoE overview FCoE hardware Layer 2 forwarding Layer 2 Ethernet overviewLayer 2 Ethernet overview Vlan tagging Loop-free network environment Frame classification incoming Congestion control and queuing Access control Access Gateway FCoE Initialization Protocol TrunkingFlow Control FIP discovery FIP login FIP logout FCoE loginFCoE logout Name server LogincfgFC zoning FCoE queuing CEE Command Line Interface Using the CEE CLIManagement Tools Saving your configuration changes Saving configuration changes with the copy commandSaving configuration changes with the write command CEE CLI Rbac permissions Accessing the CEE CLI through the console or Telnet Accessing the CEE CLI from the Fabric OS shellCEE CLI command modes CEE Command Line Interface Interface port-channel CEE CLI keyboard shortcuts CEE Command Line Interface CEE CLI command modesLists CEE CLI keyboard shortcuts Using the do command as a shortcut Displaying CEE CLI commands and command syntax CEE CLI command completion CEE CLI command output modifiers Internal and external 10 Gbps Ethernet interfaces syntax Configuring the FCoE interfaces Initial FCoE and CEE ConfigurationOverview Configuring FCoE Vlan Configuring the CEE interfaces Configuring the CEE interfacesTo disable the interface Repeat this procedure for any additional interfaces Configuring Dcbx Configuring Vlan membership Configuring Spanning Tree ProtocolConfiguring Spanning Tree Protocol Activate the protocol Configuring protect mode Configure the interface as an IP interfaceReturn to Privileged Exec mode Enable protect mode Configuring IP static routes IP static routes overview Configuring IP static routes Configuring IP static routes Recursive IP static routesFloating IP static routes Displaying and clearing IP static routes Use the clear ip route command to remove a static ip route Ip route All Vlan overview Configuring VLANs Using the CEE CLIIngress Vlan filtering Displays the frame processing logic for an incoming frame Vlan configuration guidelines and restrictions Default Vlan configuration Vlan configuration and management Configuring the MTU on an interface portVlan configuration and management To disable the CEE interface Enabling STP on a Vlan Creating a Vlan interfaceDisabling STP on a Vlan Configuring an interface port as a Layer 2 switch port Configuring a Vlan interface to forward FCoE trafficConfiguring an interface port as an access interface Configuring an interface port as a converged interface Configuring an interface port as a trunk interfaceDisabling a Vlan on a trunk interface Configuring protocol-based Vlan classifier rules Disabling a Vlan on a converged interface Configuring a Vlan classifier rule Configuring MAC address-based Vlan classifier rulesDeleting a Vlan classifier rule Creating a Vlan classifier group and adding rules Configuring the MAC address table Activating a Vlan classifier group with an interface portClearing Vlan counter statistics Displaying Vlan information Specifying or disabling the aging time for MAC addresses Adding static addresses to the MAC address table Configuring the MAC address table Configuring STP, RSTP, and Mstp using the CEE CLI STP overview Configuring STP on Dell FCoE hardware Rstp overview Is the interface learning MAC addresses? Configuring Rstp on Dell FCoE hardware Mstp overview For details, see Specifying the port priority on Configuring Mstp on Dell FCoE hardware Switchconf-mstp#max-hops Default STP, RSTP, and Mstp configuration Default STP, RSTP, and Mstp configuration STP, RSTP, and Mstp configuration and management STP, RSTP, and Mstp configuration and managementEnabling STP, RSTP, or Mstp Disabling STP, RSTP, or Mstp Specify the bridge forward delay Specifying the bridge forward delaySpecifying the bridge priority Enabling the error disable timeout timer Specifying the error disable timeout intervalEnable the error disable timeout timer Specifying the bridge maximum aging time Specifying the port-channel path cost Specifying the bridge hello time STP and RstpSpecifying the transmit hold count Rstp and Mstp Specify the port-channel path cost Enabling Cisco interoperability Mstp Disabling Cisco interoperability MstpMapping a Vlan to an Mstp instance Map a Vlan to an Mstp instance Specifying a revision number for an Mstp configuration Enter the region command to assign a name to an Mstp regionSpecifying the maximum number of hops for a Bpdu Mstp Specifying a name for an Mstp region Clearing spanning tree counters Flushing MAC addresses Rstp and MstpClearing spanning tree-detected protocols Configuring STP, RSTP, or Mstp on CEE interface ports Configuring the path costDisplaying STP, RSTP, and MSTP-related information Enabling automatic edge detection Enabling a port interface as an edge port Enabling the guard root Specifying the Mstp hello time Enter the no shutdown command to enable the CEE interfaceSpecifying restrictions for an Mstp instance Enabling port fast STP Specifying a link typeSpecifying the port priority Restricting the topology change notification Restricting the port from becoming a root portEnabling spanning tree Disabling spanning tree Configuring STP, RSTP, or Mstp on CEE interface ports Link Aggregation Group configuration Configuring Link Aggregation using the CEE CLILink aggregation overview Dell Converged Enhanced Ethernet Administrator’s Guide Configuring LAGs for a top-of-the-rack CEE switch-Example Link Aggregation Control Protocol Dynamic link aggregationStatic link aggregation Dell-proprietary aggregation Lacp configuration guidelines and restrictions Default Lacp configurationLacp configuration and management Lacp configuration guidelines and restrictions Configuring the Lacp timeout period on a CEE interface Configuring the Lacp system priorityConfiguring minimum links feature Configuring interface tracking Configure the minimum linksEnable tracking Clearing Lacp counter statistics on a LAG Clearing Lacp counter statistics on all LAG groups Lacp troubleshooting tipsDisplaying Lacp information Deskew calculation failed for link link-name Lacp troubleshooting tips Configuring Lldp using the CEE CLI Lldp overview Layer 2 topology mapping Layer 2 topology mappingPage Enhanced Transmission Selection ETS Dcbx overviewDcbx overview Lldp configuration guidelines and restrictions Dcbx interaction with other vendor devicesPriority Flow Control PFC Dcbx interaction with other vendor devices Default Lldp configuration Lldp configuration and managementDisabling and resetting Lldp globally Default Lldp configuration Specifying a system name for the Dell FCoE hardware Configuring Lldp global command optionsSpecifying a user description for Lldp Configuring the hold time for receiving devices Configuring the transmit frequency of Lldp framesAdvertising the optional Lldp TLVs Configuring the advertisement of Lldp Dcbx -related TLVs Configuring FCoE priority bitsConfiguring Lldp profiles Advertise the Lldp DCBX-related TLVs using these commands Configuring Lldp interface-level command options Enable the transmitting and receiving of Lldp framesConfigure the transmission frequency of Lldp updates Specify a description for the profile Clearing LLDP-related information Displaying LLDP-related information Lldp configuration and management Configuring ACLs using the CEE CLI ACL overview Default ACL configuration ACL configuration guidelines and restrictionsACL configuration and management Creating a standard MAC ACL and adding rules Creating an extended MAC ACL and adding rules Modifying MAC ACL rules Removing a MAC ACL Enter the no seq command to delete the existing ruleReordering the sequence numbers in a MAC ACL Applying a MAC ACL to a CEE interface Applying a MAC ACL to a Vlan interface ACL configuration and management Configuring QoS using the CEE CLI QoS overview Default user-priority mappings for untrusted interfaces RewritingQueueing User-priority mapping Configuring the QoS trust mode Incoming CoS User Priority Configuring user-priority mappings Creating a CoS-to-CoS mutation QoS map Traffic class mapping Applying a CoS-to-CoS mutation QoS mapUnicast traffic Queueing Multicast traffic Mapping CoS-to-Traffic-Class Verifying a mapping CoS-to-Traffic-Class Activating a mapping CoS-to-Traffic-ClassActivate the CoS-to-Traffic-Class mapping by name Tail drop Congestion controlCongestion control Ethernet pause Changing the Tail Drop threshold Enabling Ethernet Pause Ethernet Priority Flow ControlEnabling an Ethernet PFC Multicast rate limiting Enable an Ethernet PFC on the interfaceCreating a receive queue multicast rate-limit Deficit weighted round robin scheduling SchedulingStrict priority scheduling Scheduling Traffic class scheduling policy SP0 SP1 SP2 SP3 SP4 SP5 SP6 SP8 Multicast queue scheduling Scheduling the QoS queue Converged Enhanced Ethernet map configuration Scheduling the QoS multicast queue Pgid Creating a CEE map Defining a priority group tableCreate a CEE map Define the CEE map for Pgid Applying a CEE provisioning map to an interface Defining a priority-table mapVerifying the CEE maps 802.1x configuration guidelines and restrictions Configuring 802.1x Port Authentication802.1x protocol overview 802.1x authentication configuration tasks Interface-specific administrative tasks forConfigure authentication Between the switch and CNA or NIC 11 802.1x authentication configuration tasks Configuring 802.1x on specific interface ports Configuring 802.1x timeouts on specific interface ports Disabling 802.1x on specific interface ports Configuring sFlow using the CEE CLI SFlow protocol overviewInterface flow samples Packet counter samples Interface-specific administrative tasks for sFlow Configuring the sFlow protocol globallyDisabling sFlow on specific interfaces Configuring sFlow on specific interfaces Disable sFlow on the interfaceEnable sFlow for the interface Configure the sFlow polling interval Interface-specific administrative tasks for sFlow Port Mirroring protocol overview Configuring Port Mirroring using the CEE CLIPort Mirroring limitations Configuring ingress Port Mirroring Configuring egress Port MirroringConfiguring bidirectional Port Mirroring Configuring ingress Port Mirroring Deleting a Port Mirroring connection from a session Deleting a Port Mirroring sessionOpen an existing monitor session Use the no option to delete a particular port connection Deleting a Port Mirroring session Configuring Rmon using the CEE CLI Rmon configuration and managementDefault Rmon configuration Configuring Rmon settings Configuring Rmon group statistics collection Configuring Rmon eventsConfigure the Rmon event Configuring Rmon history collection Rmon configuration and management About Igmp Configuring IgmpActive Igmp snooping Configuring Igmp Configuring Igmp snooping querierConfiguring Igmp Configure a Vlan port member to be a multi-router interface Monitoring Igmp Page FCoE configuration using the Fabric OS CLI FCoE configuration guidelines and restrictions Managing and displaying the FCoE configuration Configuring Fcmap values for a VlanConfiguring FIP multicast advertisement intervals Managing and displaying the FCoE configuration Managing and displaying the FCoE login configuration Clearing loginsDisplaying FCoE configuration-related information Enabling or disabling FCoE login configuration management Displaying or aborting the current configuration transaction Cleaning up login groups and VNport mappings Creating and managing the FCoE login group configuration Displaying the FCoE login configurationSaving the current FCoE configuration Creating an FCoE login group Deleting an FCoE login group Modifying the FCoE login group device listTo delete an FCoE login group, perform the following task Renaming an FCoE login group To rename an FCoE login group, perform the following task Creating and managing the FCoE login group configuration CEE configuration management guidelines and restrictions CEE configuration managementCEE configuration management tasks Display the running configuration file Saving the running configuration fileLoading the startup configuration file Erasing the startup configuration file Archiving the running configuration file Restore an archived running configuration fileArchiving the startup configuration file Restore an archived startup configuration file Flash file management commands Restore a startup configuration file from FlashCEE configuration management commands Flash file management commands Debugging and logging commands Switch#erase flash Debugging and logging commands Symbols Numerics Index QoS, 100 queuing FIP PEAP, 27 Rstp Vlan