Modifying the FCoE login group device list | Dell 53-1002116-01

16 Creating and managing the FCoE login group configuration

To create an FCoE login group, perform the following task.

Task	Command

Syntax is as follows:	switch:admin> fcoelogingroup --create lgname -switch
• --create—Create a login group.	swwn -self[-allowall “member; member;…”]

•lgname—Specify the name of the login group for this switch. The maximum length is a 64-byte string.

•-switchswwn—Specify the WWN of the switch for which the login group is being created.

•-self—Specify the WWN of the current switch.

•-allowall—Allow all VN_port devices to log in to the switch.

•member—Identify the WWN of the VN_port. The WWN must be specified in hex as xx.xx.xx.xx.xx.xx.xx.xx. Only specified members are allowed to log into the switch.

Modifying the FCoE login group device list

To add or remove VN_port devices from the FCoE login group, perform the following tasks.

Task	Command

Add VN_port devices to the FCoE login group.	switch:admin> fcoelogingroup --add lgname member;
Syntax is as follows:	member;…

•lgname—Specify the name of the login group to which VN_port devices are to be added.

•member—Identify the WWN of the VN_port. The WWN must be specified in hex as xx.xx.xx.xx.xx.xx.xx.xx. Only specified members are allowed to log into the switch.

Remove VN_port devices from the FCoE login	switch:admin> fcoelogingroup --remove lgname
group. Syntax is as follows:	member; member;…

•lgname—Specify the name of the login group from which VN_port devices are to be removed.

•member—Identify the WWN of the VN_port. The WWN must be specified in hex as xx.xx.xx.xx.xx.xx.xx.x. Only specified members are allowed to log into the switch.

Deleting an FCoE login group

To delete an FCoE login group, perform the following task.

Task	Command

Delete an FCoE login group. Syntax is as follows:	switch:admin> fcoelogingroup --delete lgname
• lgname—Specify the name of the login
group.

136	Dell Converged Enhanced Ethernet Administrator’s Guide
	53-1002116-01

Image 154

Dell 53-1002116-01 manual Modifying the FCoE login group device list, Deleting an FCoE login group

Contents

Dell Converged Enhanced Ethernet Page Contents Chapter Using the CEE CLI This chapter IP static routes overview Chapter Configuring STP, RSTP, and Mstp using the CEE CLI Chapter Configuring Link Aggregation using the CEE CLI Chapter Configuring Lldp using the CEE CLI Chapter Configuring QoS using the CEE CLI This chapter Chapter Configuring Port Mirroring using the CEE CLI Chapter CEE configuration management Figures Page Tables Page This chapter About This DocumentHow this document is organized Document conventions Supported hardware and softwareText formatting Command syntax conventions Getting technical help Contacting Dell FCoE terminology Introducing FCoEFCoE overview FCoE hardware Layer 2 forwarding Layer 2 Ethernet overviewLayer 2 Ethernet overview Vlan tagging Loop-free network environment Frame classification incoming Congestion control and queuing Access control Access Gateway Flow Control FCoE Initialization ProtocolTrunking FIP discovery FIP login FIP logout FCoE loginFCoE logout Name server LogincfgFC zoning FCoE queuing CEE Command Line Interface Using the CEE CLIManagement Tools Saving configuration changes with the write command Saving your configuration changesSaving configuration changes with the copy command CEE CLI Rbac permissions CEE CLI command modes Accessing the CEE CLI through the console or TelnetAccessing the CEE CLI from the Fabric OS shell CEE Command Line Interface Interface port-channel CEE CLI keyboard shortcuts CEE Command Line Interface CEE CLI command modesLists CEE CLI keyboard shortcuts Using the do command as a shortcut Displaying CEE CLI commands and command syntax CEE CLI command completion CEE CLI command output modifiers Internal and external 10 Gbps Ethernet interfaces syntax Configuring the FCoE interfaces Initial FCoE and CEE ConfigurationOverview Configuring FCoE Vlan To disable the interface Configuring the CEE interfacesConfiguring the CEE interfaces Repeat this procedure for any additional interfaces Configuring Dcbx Configuring Vlan membership Configuring Spanning Tree ProtocolConfiguring Spanning Tree Protocol Activate the protocol Return to Privileged Exec mode Configuring protect modeConfigure the interface as an IP interface Enable protect mode Configuring IP static routes IP static routes overview Configuring IP static routes Floating IP static routes Configuring IP static routesRecursive IP static routes Displaying and clearing IP static routes Use the clear ip route command to remove a static ip route Ip route All Vlan overview Configuring VLANs Using the CEE CLIIngress Vlan filtering Displays the frame processing logic for an incoming frame Vlan configuration guidelines and restrictions Default Vlan configuration Vlan configuration and management Vlan configuration and managementConfiguring the MTU on an interface port To disable the CEE interface Enabling STP on a Vlan Creating a Vlan interfaceDisabling STP on a Vlan Configuring an interface port as a Layer 2 switch port Configuring a Vlan interface to forward FCoE trafficConfiguring an interface port as an access interface Configuring an interface port as a converged interface Configuring an interface port as a trunk interfaceDisabling a Vlan on a trunk interface Configuring protocol-based Vlan classifier rules Disabling a Vlan on a converged interface Deleting a Vlan classifier rule Configuring a Vlan classifier ruleConfiguring MAC address-based Vlan classifier rules Creating a Vlan classifier group and adding rules Clearing Vlan counter statistics Configuring the MAC address tableActivating a Vlan classifier group with an interface port Displaying Vlan information Specifying or disabling the aging time for MAC addresses Adding static addresses to the MAC address table Configuring the MAC address table Configuring STP, RSTP, and Mstp using the CEE CLI STP overview Configuring STP on Dell FCoE hardware Rstp overview Is the interface learning MAC addresses? Configuring Rstp on Dell FCoE hardware Mstp overview For details, see Specifying the port priority on Configuring Mstp on Dell FCoE hardware Switchconf-mstp#max-hops Default STP, RSTP, and Mstp configuration Default STP, RSTP, and Mstp configuration Enabling STP, RSTP, or Mstp STP, RSTP, and Mstp configuration and managementSTP, RSTP, and Mstp configuration and management Disabling STP, RSTP, or Mstp Specify the bridge forward delay Specifying the bridge forward delaySpecifying the bridge priority Enable the error disable timeout timer Enabling the error disable timeout timerSpecifying the error disable timeout interval Specifying the bridge maximum aging time Specifying the transmit hold count Rstp and Mstp Specifying the port-channel path costSpecifying the bridge hello time STP and Rstp Specify the port-channel path cost Mapping a Vlan to an Mstp instance Enabling Cisco interoperability MstpDisabling Cisco interoperability Mstp Map a Vlan to an Mstp instance Specifying the maximum number of hops for a Bpdu Mstp Specifying a revision number for an Mstp configurationEnter the region command to assign a name to an Mstp region Specifying a name for an Mstp region Clearing spanning tree counters Flushing MAC addresses Rstp and MstpClearing spanning tree-detected protocols Displaying STP, RSTP, and MSTP-related information Configuring STP, RSTP, or Mstp on CEE interface portsConfiguring the path cost Enabling automatic edge detection Enabling a port interface as an edge port Enabling the guard root Specifying the Mstp hello time Enter the no shutdown command to enable the CEE interfaceSpecifying restrictions for an Mstp instance Enabling port fast STP Specifying a link typeSpecifying the port priority Restricting the topology change notification Restricting the port from becoming a root portEnabling spanning tree Disabling spanning tree Configuring STP, RSTP, or Mstp on CEE interface ports Link Aggregation Group configuration Configuring Link Aggregation using the CEE CLILink aggregation overview Dell Converged Enhanced Ethernet Administrator’s Guide Configuring LAGs for a top-of-the-rack CEE switch-Example Static link aggregation Link Aggregation Control ProtocolDynamic link aggregation Dell-proprietary aggregation Lacp configuration and management Lacp configuration guidelines and restrictionsDefault Lacp configuration Lacp configuration guidelines and restrictions Configuring the Lacp timeout period on a CEE interface Configuring the Lacp system priorityConfiguring minimum links feature Enable tracking Configuring interface trackingConfigure the minimum links Clearing Lacp counter statistics on a LAG Clearing Lacp counter statistics on all LAG groups Lacp troubleshooting tipsDisplaying Lacp information Deskew calculation failed for link link-name Lacp troubleshooting tips Configuring Lldp using the CEE CLI Lldp overview Layer 2 topology mapping Layer 2 topology mappingPage Enhanced Transmission Selection ETS Dcbx overviewDcbx overview Priority Flow Control PFC Lldp configuration guidelines and restrictionsDcbx interaction with other vendor devices Dcbx interaction with other vendor devices Disabling and resetting Lldp globally Default Lldp configurationLldp configuration and management Default Lldp configuration Specifying a system name for the Dell FCoE hardware Configuring Lldp global command optionsSpecifying a user description for Lldp Configuring the hold time for receiving devices Configuring the transmit frequency of Lldp framesAdvertising the optional Lldp TLVs Configuring Lldp profiles Configuring the advertisement of Lldp Dcbx -related TLVsConfiguring FCoE priority bits Advertise the Lldp DCBX-related TLVs using these commands Configure the transmission frequency of Lldp updates Configuring Lldp interface-level command optionsEnable the transmitting and receiving of Lldp frames Specify a description for the profile Clearing LLDP-related information Displaying LLDP-related information Lldp configuration and management Configuring ACLs using the CEE CLI ACL overview ACL configuration and management Default ACL configurationACL configuration guidelines and restrictions Creating a standard MAC ACL and adding rules Creating an extended MAC ACL and adding rules Modifying MAC ACL rules Removing a MAC ACL Enter the no seq command to delete the existing ruleReordering the sequence numbers in a MAC ACL Applying a MAC ACL to a CEE interface Applying a MAC ACL to a Vlan interface ACL configuration and management Configuring QoS using the CEE CLI QoS overview Queueing Default user-priority mappings for untrusted interfacesRewriting User-priority mapping Configuring the QoS trust mode Incoming CoS User Priority Configuring user-priority mappings Creating a CoS-to-CoS mutation QoS map Unicast traffic Traffic class mappingApplying a CoS-to-CoS mutation QoS map Queueing Multicast traffic Mapping CoS-to-Traffic-Class Verifying a mapping CoS-to-Traffic-Class Activating a mapping CoS-to-Traffic-ClassActivate the CoS-to-Traffic-Class mapping by name Tail drop Congestion controlCongestion control Ethernet pause Changing the Tail Drop threshold Enabling Ethernet Pause Ethernet Priority Flow ControlEnabling an Ethernet PFC Multicast rate limiting Enable an Ethernet PFC on the interfaceCreating a receive queue multicast rate-limit Strict priority scheduling Deficit weighted round robin schedulingScheduling Scheduling Traffic class scheduling policy SP0 SP1 SP2 SP3 SP4 SP5 SP6 SP8 Multicast queue scheduling Scheduling the QoS queue Converged Enhanced Ethernet map configuration Scheduling the QoS multicast queue Pgid Create a CEE map Creating a CEE mapDefining a priority group table Define the CEE map for Pgid Applying a CEE provisioning map to an interface Defining a priority-table mapVerifying the CEE maps 802.1x configuration guidelines and restrictions Configuring 802.1x Port Authentication802.1x protocol overview Configure authentication Between the switch and CNA or NIC 802.1x authentication configuration tasksInterface-specific administrative tasks for 11 802.1x authentication configuration tasks Configuring 802.1x on specific interface ports Configuring 802.1x timeouts on specific interface ports Disabling 802.1x on specific interface ports Interface flow samples Configuring sFlow using the CEE CLISFlow protocol overview Packet counter samples Interface-specific administrative tasks for sFlow Configuring the sFlow protocol globallyDisabling sFlow on specific interfaces Enable sFlow for the interface Configuring sFlow on specific interfacesDisable sFlow on the interface Configure the sFlow polling interval Interface-specific administrative tasks for sFlow Port Mirroring protocol overview Configuring Port Mirroring using the CEE CLIPort Mirroring limitations Configuring bidirectional Port Mirroring Configuring ingress Port MirroringConfiguring egress Port Mirroring Configuring ingress Port Mirroring Open an existing monitor session Deleting a Port Mirroring connection from a sessionDeleting a Port Mirroring session Use the no option to delete a particular port connection Deleting a Port Mirroring session Default Rmon configuration Configuring Rmon using the CEE CLIRmon configuration and management Configuring Rmon settings Configuring Rmon group statistics collection Configuring Rmon eventsConfigure the Rmon event Configuring Rmon history collection Rmon configuration and management About Igmp Configuring IgmpActive Igmp snooping Configuring Igmp Configuring IgmpConfiguring Igmp snooping querier Configure a Vlan port member to be a multi-router interface Monitoring Igmp Page FCoE configuration using the Fabric OS CLI FCoE configuration guidelines and restrictions Configuring FIP multicast advertisement intervals Managing and displaying the FCoE configurationConfiguring Fcmap values for a Vlan Managing and displaying the FCoE configuration Displaying FCoE configuration-related information Managing and displaying the FCoE login configurationClearing logins Enabling or disabling FCoE login configuration management Displaying or aborting the current configuration transaction Cleaning up login groups and VNport mappings Saving the current FCoE configuration Creating and managing the FCoE login group configurationDisplaying the FCoE login configuration Creating an FCoE login group Deleting an FCoE login group Modifying the FCoE login group device listTo delete an FCoE login group, perform the following task Renaming an FCoE login group To rename an FCoE login group, perform the following task Creating and managing the FCoE login group configuration CEE configuration management guidelines and restrictions CEE configuration managementCEE configuration management tasks Loading the startup configuration file Display the running configuration fileSaving the running configuration file Erasing the startup configuration file Archiving the startup configuration file Archiving the running configuration fileRestore an archived running configuration file Restore an archived startup configuration file CEE configuration management commands Flash file management commandsRestore a startup configuration file from Flash Flash file management commands Debugging and logging commands Switch#erase flash Debugging and logging commands Symbols Numerics Index QoS, 100 queuing FIP PEAP, 27 Rstp Vlan