Dell 53-1002116-01 manual Configuring Rmon history collection

RMON configuration and management 14

switch(config)#interface intengigabitethernet 0/1

3. Enable the CEE interface.

switch(conf-if-te-0/1)#no shutdown

4. Configure RMON group statistics on the interface.

switch(conf-if-te-0/1)#rmon collection stats 200 owner john_smith

5. Enter the copy command to save the running-config file to the startup-config file.

switch(conf-if-te-0/1)#exitswitch(config)#end

switch#copy running-config startup-config

Configuring RMON history collection

The RMON history collection command collects the periodic statistical samples of RMON group statistics on an interface for later retrieval. By default, the collection of RMON history is not enabled. This option records periodic statistical samples from a network and stores them for later retrieval. These samples include, but aren’t limited to:

•Sample period

•Number of samples

•Items sampled

To enable collection history, perform the following steps from Privileged EXEC mode. 1. Enter the configure terminal command to access global configuration mode.

switch#configure terminal

2. Enter the interface command to specify the CEE interface type and slot/port number.

switch(config)#interface intengigabitethernet 0/1

3. Enable the CEE interface.

switch(conf-if-te-0/1)#no shutdown

4. Activate RMON history collection for the interface.

switch(conf-if-te-0/1)#rmon collection history 1 buckets 20 interval 10 owner john_smith

5. Return to Privileged EXEC mode.

switch(conf-if-te-0/1)#exitswitch(config)#end

6. Display the RMON history.

switch#show rmon history RMON history control entry 1

interface: ifIndex.1745682445 InTengigabitEthernet 0/13

buckets requested: 20

buckets granted: 20

sampling interval: 10

Owner: jsmith

7.Enter the copy command to save the running-config file to the startup-config file.

switch#copy running-config startup-config

Dell Converged Enhanced Ethernet Administrator’s Guide	125
53-1002116-01