Dell 53-1002116-01 manual Debugging and logging commands, Switch#erase flash

		Debugging and logging commands	17
NOTE
Use of the flash:// prefix is optional.
TABLE 25	CEE Flash memory file management commands
Task		Command
List the files in the Flash memory directory.		switch#dir
Delete a file from the Flash memory directory.		switch#delete flash://example_filename
Erase all the files in the Flash memory directory.		switch#erase flash
NOTE: This command erases all the files in the		% Warning: Erasing flash filesystem will
Flash directory except the default startup		remove all files in flash://.
configuration file which is programmed as		Continue to erase?(y/n):y
a manufacturing default.
Rename a file in the Flash.		switch#rename filename new_filename
Display the contents of a file in the Flash memory		switch#show file flash://example_filename
directory.

Debugging and logging commands

Table 26 describes the tasks related to debugging and logging commands on the switch. The Converged Enhanced Ethernet Command Reference contains complete information on all available CLI commands.

Perform the following tasks from Privileged EXEC mode.

TABLE 26	Debugging and logging commands
Task		Command
Display debugging information for CEE		switch#show debug
components.
Display logging information for CEE components.		switch#show logging
Display the collection of information needed for		switch#show tech-support
technical support.

NOTE: The supportsave command in Fabric OS includes the debugging data provided by the above commands.

Dell Converged Enhanced Ethernet Administrator’s Guide	143
53-1002116-01