Dell 53-1002116-01 Accessing the CEE CLI through the console or Telnet, CEE CLI command modes

CEE Command Line Interface 2

Accessing the CEE CLI through the console or Telnet

NOTE

While this example uses the UserID role to log in to the switch, any role listed in the “CEE CLI RBAC permissions” section can be used.

The procedure to access the CEE CLI is the same through either the console interface or through a Telnet session; both access methods bring you to the login prompt.

switch login: userid Password: switch:admin> cmsh switch#

To return to the Fabric OS CLI, enter the following command.

switch#exit switch:admin>

NOTE

Multiple users can Telnet and issue commands using the Exec mode and the Privileged Exec mode.

Accessing the CEE CLI from the Fabric OS shell

To enter the CEE CLI from the Fabric OS shell, enter the following command.

switch:admin> cmsh switch#

To return to the Fabric OS shell, enter the following command.

switch#exit switch:admin>

CEE CLI command modes

Figure 2 displays the CEE CLI command mode hierarchy.

FIGURE 2 CEE CLI command mode hierarchy

Interface configuration

Port-channel

10-Gigabit Ethernet

VLAN

EXEC

Privileged EXEC

Global configuration

Protocol configuration

LLDP

Spanning-tree

CEE CLI features

CEE map

ACLs

Console and VTY (line)

configuration

Console

Virtual terminal

Table 3 lists the CEE CLI command modes and describes how to access them.

Dell Converged Enhanced Ethernet Administrator’s Guide	15
53-1002116-01