Configuring a Vlan classifier rule | Dell 53-1002116-01 specification

Configuring protocol-based VLAN classifier rules

5

•FCoE Initialization Protocol (FIP)

•IP version 6 (IPv6)

NOTE

For complete information on all available VLAN classifier rule options, see the Converged Enhanced Ethernet Command Reference.

Configuring a VLAN classifier rule

To configure a protocol-based VLAN classifier rule, perform the following steps from Privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Enter the vlan classifier rule command to configure a protocol-based VLAN classifier rule.

switch(config)#vlan classifier rule 1 proto fcoe encap ethv2

Configuring MAC address-based VLAN classifier rules

To configure a MAC address-based VLAN classifier rule, perform the following steps from Privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Enter the vlan classifier rule command to configure a MAC address-based VLAN classifier rule.

switch(config)#vlan classifier rule 5 mac 0008.744c.7fid

Deleting a VLAN classifier rule

VLAN classifier groups (1 through 16) can contain any number of VLAN classifier rules.

To configure a VLAN classifier group and remove a VLAN classifier rule, perform the following steps from Privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Specify a VLAN classifier group and delete a rule.

switch(config)#vlan classifier group 1 delete rule 1

Creating a VLAN classifier group and adding rules

VLAN classifier groups (1 through 16) can contain any number of VLAN classifier rules.

NOTE

A vlan classifier cannot be added to the FCoE VLAN.

To configure a VLAN classifier group and add a VLAN classifier rule, perform the following steps from Privileged EXEC mode.

1.Enter the configure terminal command to access global configuration mode.

2.Create a VLAN classifier group and add a rule.

switch(config)#vlan classifier group 1 add rule 1

Dell Converged Enhanced Ethernet Administrator’s Guide	39
53-1002116-01

Image 57

Dell 53-1002116-01 manual Configuring a Vlan classifier rule, Configuring MAC address-based Vlan classifier rules

Contents

Dell Converged Enhanced Ethernet Page Contents This chapter IP static routes overview Chapter Using the CEE CLI Chapter Configuring STP, RSTP, and Mstp using the CEE CLI Chapter Configuring Link Aggregation using the CEE CLI Chapter Configuring Lldp using the CEE CLI This chapter Chapter Configuring QoS using the CEE CLI Chapter Configuring Port Mirroring using the CEE CLI Chapter CEE configuration management Figures Page Tables Page About This Document This chapterHow this document is organized Supported hardware and software Document conventionsText formatting Command syntax conventions Contacting Dell Getting technical help Introducing FCoE FCoE terminologyFCoE overview FCoE hardware Layer 2 Ethernet overview Layer 2 forwardingLayer 2 Ethernet overview Vlan tagging Frame classification incoming Loop-free network environment Congestion control and queuing Access Gateway Access control Trunking FCoE Initialization ProtocolFlow Control FIP discovery FIP login FCoE login FIP logoutFCoE logout Logincfg Name serverFC zoning FCoE queuing Using the CEE CLI CEE Command Line InterfaceManagement Tools Saving configuration changes with the copy command Saving your configuration changesSaving configuration changes with the write command CEE CLI Rbac permissions Accessing the CEE CLI from the Fabric OS shell Accessing the CEE CLI through the console or TelnetCEE CLI command modes CEE Command Line Interface Interface port-channel CEE Command Line Interface CEE CLI command modes CEE CLI keyboard shortcutsLists CEE CLI keyboard shortcuts Displaying CEE CLI commands and command syntax Using the do command as a shortcut CEE CLI command output modifiers CEE CLI command completion Internal and external 10 Gbps Ethernet interfaces syntax Initial FCoE and CEE Configuration Configuring the FCoE interfacesOverview Configuring FCoE Vlan Configuring the CEE interfaces Configuring the CEE interfacesTo disable the interface Repeat this procedure for any additional interfaces Configuring Dcbx Configuring Spanning Tree Protocol Configuring Vlan membershipConfiguring Spanning Tree Protocol Activate the protocol Configure the interface as an IP interface Configuring protect modeReturn to Privileged Exec mode Enable protect mode IP static routes overview Configuring IP static routes Configuring IP static routes Recursive IP static routes Configuring IP static routesFloating IP static routes Displaying and clearing IP static routes Ip route All Use the clear ip route command to remove a static ip route Configuring VLANs Using the CEE CLI Vlan overviewIngress Vlan filtering Displays the frame processing logic for an incoming frame Default Vlan configuration Vlan configuration guidelines and restrictions Configuring the MTU on an interface port Vlan configuration and managementVlan configuration and management To disable the CEE interface Creating a Vlan interface Enabling STP on a VlanDisabling STP on a Vlan Configuring a Vlan interface to forward FCoE traffic Configuring an interface port as a Layer 2 switch portConfiguring an interface port as an access interface Configuring an interface port as a trunk interface Configuring an interface port as a converged interfaceDisabling a Vlan on a trunk interface Disabling a Vlan on a converged interface Configuring protocol-based Vlan classifier rules Configuring MAC address-based Vlan classifier rules Configuring a Vlan classifier ruleDeleting a Vlan classifier rule Creating a Vlan classifier group and adding rules Activating a Vlan classifier group with an interface port Configuring the MAC address tableClearing Vlan counter statistics Displaying Vlan information Adding static addresses to the MAC address table Specifying or disabling the aging time for MAC addresses Configuring the MAC address table STP overview Configuring STP, RSTP, and Mstp using the CEE CLI Configuring STP on Dell FCoE hardware Is the interface learning MAC addresses? Rstp overview Configuring Rstp on Dell FCoE hardware For details, see Specifying the port priority on Mstp overview Configuring Mstp on Dell FCoE hardware Switchconf-mstp#max-hops Default STP, RSTP, and Mstp configuration Default STP, RSTP, and Mstp configuration STP, RSTP, and Mstp configuration and management STP, RSTP, and Mstp configuration and managementEnabling STP, RSTP, or Mstp Disabling STP, RSTP, or Mstp Specifying the bridge forward delay Specify the bridge forward delaySpecifying the bridge priority Specifying the error disable timeout interval Enabling the error disable timeout timerEnable the error disable timeout timer Specifying the bridge maximum aging time Specifying the bridge hello time STP and Rstp Specifying the port-channel path costSpecifying the transmit hold count Rstp and Mstp Specify the port-channel path cost Disabling Cisco interoperability Mstp Enabling Cisco interoperability MstpMapping a Vlan to an Mstp instance Map a Vlan to an Mstp instance Enter the region command to assign a name to an Mstp region Specifying a revision number for an Mstp configurationSpecifying the maximum number of hops for a Bpdu Mstp Specifying a name for an Mstp region Flushing MAC addresses Rstp and Mstp Clearing spanning tree countersClearing spanning tree-detected protocols Configuring the path cost Configuring STP, RSTP, or Mstp on CEE interface portsDisplaying STP, RSTP, and MSTP-related information Enabling automatic edge detection Enabling the guard root Enabling a port interface as an edge port Enter the no shutdown command to enable the CEE interface Specifying the Mstp hello timeSpecifying restrictions for an Mstp instance Specifying a link type Enabling port fast STPSpecifying the port priority Restricting the port from becoming a root port Restricting the topology change notificationEnabling spanning tree Disabling spanning tree Configuring STP, RSTP, or Mstp on CEE interface ports Configuring Link Aggregation using the CEE CLI Link Aggregation Group configurationLink aggregation overview Dell Converged Enhanced Ethernet Administrator’s Guide Configuring LAGs for a top-of-the-rack CEE switch-Example Dynamic link aggregation Link Aggregation Control ProtocolStatic link aggregation Dell-proprietary aggregation Default Lacp configuration Lacp configuration guidelines and restrictionsLacp configuration and management Lacp configuration guidelines and restrictions Configuring the Lacp system priority Configuring the Lacp timeout period on a CEE interfaceConfiguring minimum links feature Configure the minimum links Configuring interface trackingEnable tracking Clearing Lacp counter statistics on a LAG Lacp troubleshooting tips Clearing Lacp counter statistics on all LAG groupsDisplaying Lacp information Deskew calculation failed for link link-name Lacp troubleshooting tips Lldp overview Configuring Lldp using the CEE CLI Layer 2 topology mapping Layer 2 topology mappingPage Dcbx overview Enhanced Transmission Selection ETSDcbx overview Dcbx interaction with other vendor devices Lldp configuration guidelines and restrictionsPriority Flow Control PFC Dcbx interaction with other vendor devices Lldp configuration and management Default Lldp configurationDisabling and resetting Lldp globally Default Lldp configuration Configuring Lldp global command options Specifying a system name for the Dell FCoE hardwareSpecifying a user description for Lldp Configuring the transmit frequency of Lldp frames Configuring the hold time for receiving devicesAdvertising the optional Lldp TLVs Configuring FCoE priority bits Configuring the advertisement of Lldp Dcbx -related TLVsConfiguring Lldp profiles Advertise the Lldp DCBX-related TLVs using these commands Enable the transmitting and receiving of Lldp frames Configuring Lldp interface-level command optionsConfigure the transmission frequency of Lldp updates Specify a description for the profile Displaying LLDP-related information Clearing LLDP-related information Lldp configuration and management ACL overview Configuring ACLs using the CEE CLI ACL configuration guidelines and restrictions Default ACL configurationACL configuration and management Creating a standard MAC ACL and adding rules Modifying MAC ACL rules Creating an extended MAC ACL and adding rules Enter the no seq command to delete the existing rule Removing a MAC ACLReordering the sequence numbers in a MAC ACL Applying a MAC ACL to a Vlan interface Applying a MAC ACL to a CEE interface ACL configuration and management QoS overview Configuring QoS using the CEE CLI Rewriting Default user-priority mappings for untrusted interfacesQueueing User-priority mapping Incoming CoS User Priority Configuring the QoS trust mode Creating a CoS-to-CoS mutation QoS map Configuring user-priority mappings Applying a CoS-to-CoS mutation QoS map Traffic class mappingUnicast traffic Queueing Mapping CoS-to-Traffic-Class Multicast traffic Activating a mapping CoS-to-Traffic-Class Verifying a mapping CoS-to-Traffic-ClassActivate the CoS-to-Traffic-Class mapping by name Congestion control Tail dropCongestion control Changing the Tail Drop threshold Ethernet pause Ethernet Priority Flow Control Enabling Ethernet PauseEnabling an Ethernet PFC Enable an Ethernet PFC on the interface Multicast rate limitingCreating a receive queue multicast rate-limit Scheduling Deficit weighted round robin schedulingStrict priority scheduling Scheduling SP0 SP1 SP2 SP3 SP4 SP5 SP6 SP8 Traffic class scheduling policy Scheduling the QoS queue Multicast queue scheduling Scheduling the QoS multicast queue Converged Enhanced Ethernet map configuration Pgid Defining a priority group table Creating a CEE mapCreate a CEE map Define the CEE map for Pgid Defining a priority-table map Applying a CEE provisioning map to an interfaceVerifying the CEE maps Configuring 802.1x Port Authentication 802.1x configuration guidelines and restrictions802.1x protocol overview Interface-specific administrative tasks for 802.1x authentication configuration tasksConfigure authentication Between the switch and CNA or NIC 11 802.1x authentication configuration tasks Configuring 802.1x timeouts on specific interface ports Configuring 802.1x on specific interface ports Disabling 802.1x on specific interface ports SFlow protocol overview Configuring sFlow using the CEE CLIInterface flow samples Packet counter samples Configuring the sFlow protocol globally Interface-specific administrative tasks for sFlowDisabling sFlow on specific interfaces Disable sFlow on the interface Configuring sFlow on specific interfacesEnable sFlow for the interface Configure the sFlow polling interval Interface-specific administrative tasks for sFlow Configuring Port Mirroring using the CEE CLI Port Mirroring protocol overviewPort Mirroring limitations Configuring egress Port Mirroring Configuring ingress Port MirroringConfiguring bidirectional Port Mirroring Configuring ingress Port Mirroring Deleting a Port Mirroring session Deleting a Port Mirroring connection from a sessionOpen an existing monitor session Use the no option to delete a particular port connection Deleting a Port Mirroring session Rmon configuration and management Configuring Rmon using the CEE CLIDefault Rmon configuration Configuring Rmon settings Configuring Rmon events Configuring Rmon group statistics collectionConfigure the Rmon event Configuring Rmon history collection Rmon configuration and management Configuring Igmp About IgmpActive Igmp snooping Configuring Igmp snooping querier Configuring IgmpConfiguring Igmp Configure a Vlan port member to be a multi-router interface Monitoring Igmp Page FCoE configuration guidelines and restrictions FCoE configuration using the Fabric OS CLI Configuring Fcmap values for a Vlan Managing and displaying the FCoE configurationConfiguring FIP multicast advertisement intervals Managing and displaying the FCoE configuration Clearing logins Managing and displaying the FCoE login configurationDisplaying FCoE configuration-related information Enabling or disabling FCoE login configuration management Cleaning up login groups and VNport mappings Displaying or aborting the current configuration transaction Displaying the FCoE login configuration Creating and managing the FCoE login group configurationSaving the current FCoE configuration Creating an FCoE login group Modifying the FCoE login group device list Deleting an FCoE login groupTo delete an FCoE login group, perform the following task To rename an FCoE login group, perform the following task Renaming an FCoE login group Creating and managing the FCoE login group configuration CEE configuration management CEE configuration management guidelines and restrictionsCEE configuration management tasks Saving the running configuration file Display the running configuration fileLoading the startup configuration file Erasing the startup configuration file Restore an archived running configuration file Archiving the running configuration fileArchiving the startup configuration file Restore an archived startup configuration file Restore a startup configuration file from Flash Flash file management commandsCEE configuration management commands Flash file management commands Switch#erase flash Debugging and logging commands Debugging and logging commands Index Symbols Numerics QoS, 100 queuing FIP PEAP, 27 Rstp Vlan