Dell 5324 Sntp unicast client poll, Sntp server, Console config# sntp unicast client poll, 102

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

sntp unicast client poll

The sntp unicast client poll Global Configuration mode command enables polling for the Simple Network Time Protocol (SNTP) predefined unicast clients. To disable the polling for SNTP client, use the no form of this command.

Syntax

sntp unicast client poll no sntp unicast client poll

This command has no arguments or keywords.

Default Configuration

Disabled

Command Mode

Global configuration mode

User Guidelines

•Polling time is determined by the sntp client poll timer Global Configuration mode command.

Examples

The following example enables polling for the Simple Network Time Protocol (SNTP) predefined unicast clients.

Console (config)# sntp unicast client poll

sntp server

The sntp server Global Configuration mode command configures the device to use the Simple Network Time Protocol (SNTP) to request and accept Network Time Protocol (NTP) traffic from a server. To remove a server from the list of NTP servers, use the no form of this command.

Syntax

sntp server ip-address hostname [poll] [key keyid]

no sntp server host

•ip-address—IP address of the server.

•hostname—Hostname of the server. (Range: 1 - 158 characters)

•poll—Enable polling.

•key keyid—Authentication key to use when sending packets to this peer. (Range:1 – 4294967295)

102

Clock