Dell 5324 manual Show line, Syntax Exec-timeout minutes seconds No exec-timeout, 175

Syntax

exec-timeout minutes [seconds]

no exec-timeout

•minutes—Integer that specifies the number of minutes. (Range: 0 - 65535)

•seconds—Additional time intervals in seconds. (Range: 0 - 59)

Default Configuration

The default configuration is 10 minutes.

Command Mode

Line Configuration mode

User Guidelines

•To specify no timeout, enter the exec-timeout("0 0") command.

Examples

The following example configures the interval that the system waits until user input is detected to 20 minutes.

Console (config)# line console

Console(config-line)# exec-timeout20

show line

The show line User EXEC mode command displays line parameters.

Syntax

show line [console telnet ssh]

•console—Console terminal line.

•telnet—Virtual terminal for remote console access (Telnet).

•ssh—Virtual terminal for secured remote console access (SSH).

Default Configuration

Default value is console.

Command Mode

User EXEC mode

User Guidelines

•There are no user guidelines for this command.

Line Commands

175