192 Management ACL
www.dell.com | support.dell.com
•
service
service
—Indicates service type. Can be one of the following:
telnet
,
ssh
,
http,
https
or
snmp
.
Default Configuration
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
User Guidelines
• Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is
defined on the appropriate interface.The system supports up to 256 management access
rules.
Example
The following example shows how all ports are denied in the access-list called "mlist".
management access-class
The
management access-class
Global Configuration mode command defines which management
access-list is used. To disable restriction, use the
no
form of this command.
Syntax
management access-class
{
console-only
|
name
}
no management access-class
•
name
—Name of the access list. If unspecified, defaults to an empty access-list.(Range: 1 -
32 characters)
•
console-only
—The device can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Console (config)# management access-list mlist
Console (config-macl)# deny