Dell 5324 manual IP Addressing Commands, Clear host dhcp, Ip address, Console# clear host dhcp

IP Addressing Commands

clear host dhcp

The clear host dhcp Privileged EXEC mode command deletes entries from the host name-to- address mapping received from Dynamic Host Configuration Protocol (DHCP).

Syntax

clear host dhcp {name *}

•name—Particular host entry to remove. (Range: 1 - 158 characters.)

•*— Removes all entries.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

•This command would delete the host name-to-address mapping temporarily until the next renew of the IP address.

Examples

The following example deletes all entries from the host name-to-address mapping.

Console# clear host dhcp *

ip address

The ip address Interface Configuration mode command sets an IP address. To remove an IP address, use the no form of this command.

Syntax

ip address ip-address {mask prefix-length}no ip address [ip-address]

•ip-address—IP address

•mask—Specifies the network mask of the IP address. (Range: Valid Subnet mask)

IP Addressing Commands

157