Dell 5324 LC Line Configuration Mode, Enables the Simple Network Time Protocol Sntp client on an

om	name	Configures a name to a VLAN.
l l . c
	negotiation	Enables auto-negotiation operation for the speed and duplex parameters
d e		of a given interface.
o r t .
	port monitor	Starts a port monitoring session.
u p p
	port security	Disables new address learning on an interface.
s
	port security routed secure-	Adds MAC-layer secure addresses to a routed port.
o m	address
l l . c
	port storm-control broadcast	Enables broadcast storm control.
d e	enable
w w .
	port storm-control broadcast	Configures the maximum broadcast rate.
w	rate
	qos cos	Configures the default port CoS value.
	qos trust (Interface)	Enables each port trust state while the system is in basic mode.
	rmon collection history	Enables a Remote Monitoring (RMON) MIB history statistics group on
		an interface.
	shutdown	Disables interfaces.
	sntp client enable (interface)	Enables the Simple Network Time Protocol (SNTP) client on an
		interface.
	spanning-tree cost	Configures the spanning tree path cost for a port.
	spanning-tree disable	Disables spanning tree on a specific port.
	spanning-treelink-type	Overrides the default link-type setting.
	spanning-tree portfast	Enables PortFast mode.
	spanning-tree port-priority	Configures port priority.
	speed	Configures the speed of a given ethernet interface when not using auto-
		negotiation.
	qos map dscp-queue	Defines the wrr-queue mechanism on an egress queue.
	wrr-queue bandwidth	Assigns Weighted Round Robin (WRR) weights to egress queues.
	LC (Line Configuration) Mode
	Command	Description
	enable authentication	Specifies the authentication method list when accessing a higher
		privilege level from a remote telnet or console.
	exec-timeout	Configures the interval that the system waits until user input is detected.
	history	Enables the command history function.

50

Command Modes