Dell 5324 manual IC Interface Configuration Mode, Sntp

om	snmp-server set	Sets SNMP MIB value by the CLI.
l l . c
	snmp-server trap	Enables the switch to send Simple Network Management Protocol traps
d e	authentication	when authentication failed.
o r t .
	sntp authenticate	Grants authentication for received Network Time Protocol (NTP)
p p		traffic from servers.
s u
	sntp authentication-key	Defines an authentication key for Simple Network Time Protocol
m		(SNTP).
l . c o
	spanning-tree	Enables spanning tree functionality.
d e l
	spanning-tree bpdu	Defines BPDU handling when spanning tree is disabled on an interface
w w .
	spanning-tree forward-time	Configures the spanning tree bridge forward time.
w
	spanning-tree hello-time	Configures the spanning tree bridge Hello Time.
	spanning-tree max-age	Configures the spanning tree bridge maximum age.
	spanning-tree mode	Configures the spanning tree protocol.
	spanning-tree pathcost method	Sets the default pathcost method.
	spanning-tree priority	Configures the spanning tree priority.
	tacacs-server key	Sets the authentication encryption key used for all TACACS+
		communications between the device and the TACACS+ daemon.
	tacacs-server source-ip	Specifies the source IP address that will be used for the communication
		with TACACS servers.
	tacacs-server timeout	Sets the timeout value.
	tacacs-server host	Specifies a TACACS+ host.
	username	Establishes a username-based authentication system.
	vlan database	Enters the VLAN database configuration mode.
	wrr-queue cos-map	Maps assigned CoS values to select one of the egress queues.
	IC (Interface Configuration) Mode
	Command	Description
	back-pressure	Enables Back Pressure on a given interface.
	channel-group	Associates a port with a Port-channel.
	clear host dhcp	Sets an IP address on the device.
	description	Adds a description to an interface.
	dot1x auth-not-req	Enables unauthorized users access to that VLAN

48

Command Modes