LLDP Commands 185
show lldp configuration
To display the Link Layer Discovery Protocol (LLDP) configuration, use the
show lldp
configuration
command in privileged EXEC mode.
Syntax
show lldp configuration
[ethernet interface]
•
Interface
— Ethernet port
Command Modes
Privileged EXEC
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the Link Layer Discovery Protocol (LLDP) configuration
show lldp local
To display the Link Layer Discovery Protocol (LLDP) information that is advertised from a specific
port, use the
show lldp local
command in privileged EXEC mode.
Syntax
show lldp local ethernet interface
•
Interface
— Ethernet port
Switch# show lldp configuration
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Port State Optional TLVs Addres
g1 RX, TX PD, SN, SD, SC 172.16.1.1
g2 TX PD, SN 172.16.1.1
g3 Disabled