Intel 654655-001 manual Spanning tree commands, del-sec-vlan, get-svlan-tbl, set-mon-port, monitor

C H A P T E R 2 Intel Express 100BASE-TX Switching Hub

del-sec-vlan

del-sec-vlan {runnvram} <lan_id>

Deletes the SVLAN specified by lan_id. use the get-svlan-tblcommand to see these ID numbers.

get-svlan-tbl

get-svlan-tbl {runnvram}

Shows the table of defined SVLANs.

SYS_console> get-svlan-tbl run

RUNTIME	SECURITY VIRTUAL	LANs TABLE
================================
SVLAN ID	P1 P2 P3 P4	P5 P6 P7

======================================

1: + - + - + - -

2:+ + - - - - +

set-mon-port

set-mon-port <port>

Sets the port to be monitored. port is the port number. All traffic from this port is duplicated, or mirrored, on the port specified by the monitor command.

monitor

monitor <port>

Sets the monitoring port. All traffic from the port specified by set-mon-portis duplicated on port.

stop-mon

Stops port monitoring.

Spanning tree commands

Spanning tree automatically configures a loop-free topology in a bridged environment. The spanning tree agent is implemented in conformance with the IEEE 802.1d standard. In most cases, the defaults work fine and you won’t need to use these commands.

46