Installing a Filer System 2-1
",,-.
)
The following list provides an overview of the procedures you perform to install the
filer and the rest of the units in the system:
Preparing for the installation
Installing the filer in a rack
Connecting the filer to a PowerVault 700N Disk-Array Enclosure (DAE) storage
system
Connecting the filer to the network
Establishing a console terminal connection to the filer
Connecting the system to a power source
'%'
This chapter provides instructions for installing the filer and connecting the
PowerVault 700N storage system and backup tape device for the first time
NOTE: This chapter does not provide instructions for installing the PowerVault 700N
storage system or a tape backup device. For instructions about those topics, refer to
the hardware guide provided with the equipment.
')5
Before you install your system, make sure that you meet the following tools, equip-
ment, environmental, electrical, space, and location requirements.
;��