Dell 740N, 720N, 760N manual #,+, $!1

Table 2-5 lists all available network connectivity.

￿￿￿￿￿￿￿￿)￿￿￿￿￿￿$￿￿!￿￿￿￿￿￿￿￿￿￿￿￿1

￿￿￿￿￿￿￿￿￿￿￿￿2￿￿5￿￿￿￿￿￿￿￿￿￿￿￿￿ .￿￿￿￿￿￿￿￿￿￿￿2￿￿5￿￿￿￿￿￿￿￿￿￿￿￿￿

Built-in 10/100Base-T Ethernet

￿

￿

Additional 10/100Base-T Ethernet

GB (1000Base-T) Ethernet

'￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿8￿￿￿￿￿￿￿￿"￿￿#￿￿￿

The filer supports three types of Ethernet NICs: a single-port 10/100Base-T, a quad- port 10/100Base-T, and a GB Ethernet.

!￿￿￿￿￿￿￿￿￿￿ ￿￿￿#￿,￿+￿￿￿￿￿￿￿￿￿

Table 2-6 lists the cabling requirements for Ethernet connections.

￿￿￿￿￿￿￿￿,￿￿￿#￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿4￿5￿￿￿￿-￿￿￿￿

-￿4￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿/￿0￿￿￿￿￿￿￿￿￿
10Base-T	Category 3 or 5 unshielded twisted-
	pair (UTP) cable.*
100Base-TX	Category 5 UTP cable.*
GB Ethernet	Fiber cable.

*Do not exceed the maximum cable length specification.

0￿.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿1&21&&￿￿￿￿￿￿￿!￿￿￿￿￿￿￿￿￿￿￿.￿￿￿

To connect the filer to a 10/100Base-T Ethernet network, perform the following step:

1.Push the twisted-pair cable connector into the filer’s built-in RJ-45 connector, labeled 10/100Base-T, until it clicks and locks into place.

Use Category 3 (10Base-T only) or Category 5 (10/100Base-T) unshielded twisted- pair (UTP) cable.

Figure 2-11 shows the built-in Ethernet connector.

2-16 Dell PowerVault 720N, 740N, and 760N Installation and Troubleshooting Guide