0￿.￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

To connect an ASCII terminal to the filer, perform the following steps:

1.Ensure that the terminal settings match the filer’s, listed in Table 2-8.

￿￿￿￿￿￿￿￿0￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿--￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿

1￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿

 

 

Line speed

9600 baud

Data bits per character

8

Parity

None

Stop Bits

1

Flow Control

None

 

 

Refer to the documentation for your terminal for further details.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿+￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2.Connect the cable’s socket end to the filer’s plug connector, labeled CONSOLE.

Use the provided DB-9–to–DB-9 serial cable.

Figure 2-13 shows the location of the CONSOLE port.

Console port

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿'￿￿￿￿￿￿￿

￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿#￿￿￿￿￿￿￿￿,￿￿￿￿￿￿￿￿￿￿

If you are connecting an ASCII terminal from a remote site, be sure that you do not have a local terminal connected to the filer’s CONSOLE port.

Installing a Filer System 2-19

Page 49
Image 49
Dell 740N, 720N, 760N manual shows the location of the Console port