Troubleshooting the Filer Hardware 3-5
!!
The built-in 10/100BASE-T Ethernet connector has two LEDs, as shown in Figure 3-3.
%#'#
Table 3-3 describes the LEDs for the built-in 10/100BASE-T Ethernet connector.
2$-:8 ' 8&
The filer supports a single-port 10/100BASE-T and a quad-port 10/100BASE-T Ethernet
card.
#1&21&&!!
The single-port 10/100BASE-T Ethernet card has one connector and two LEDs, as
shown in Figure 3-4.
%#'#(
-$ 7
Top Gr e e n On —Ethernet connection is ready.
Off—No Ethernet connection is present.
Bottom Yellow On—Traffic is passing on the network.
Off—No traffic on the network.
Ethernet connector
Green LED
Yell ow L ED