NOTE: Enabling/disabling IPv4/IPv6 is possible only in a dual stack environment (where both the
IPv4 and IPv6 stacks are loaded).
Users
Subtab: Users
Under the Users tab, you can modify the remote access user configuration. You can add, configure, and
view information about Remote Access Controller users.
Removable Flash MediaClick the Removable Flash Media object to view the health and redundancy status of the Internal SD
Modules and vFlash media. The Removable Flash Media action window has the Properties tab.
Properties
Subtab: Information
Under the Properties tab, you can view information about the Removable Flash Media and Internal SD
Modules. This includes details about the Connector Name, its state, and storage size.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want to be performed in the event
that the removable flash media probe returns a warning or failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels for removable flash media
probes. The selected traps are triggered if the system generates a corresponding event at the selected
severity level.
Alert management is common for Internal SD modules and vFlash. Configuring alert actions/SNMP/PEF
for either the SD modules or vFlash automatically configures it for the other.
SlotsClick the Slots object to manage the connectors or sockets on your system board that accept printed
circuit boards, such as expansion cards. The Slots object action window has a Properties tab.
Properties
Subtab: Information
Under the Properties tab, you can view information about each slot and installed adapter.
TemperaturesClick the Temperatures object to manage your system temperature in order to prevent thermal damage
to your system’s internal components. Server Administrator monitors the temperature in a variety of
locations in your system's chassis to ensure that temperatures inside the chassis do not become too high.
57