Removing and Replacing Parts 23
Keyboard Assembly
Removing the Keyboard Screws

Removing the Keyboard Assembly

NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1Remove the hard drive.
2Turn the computer over, and remove the five M2.5 x 12-mm screws
from the holes labeled "circle K."
3Turn the computer over and open the display.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and
time-consuming to replace. Be careful when removing and handling the
keyboard.
M2.5 x 12-mm screws (5)