Dell C600 Display Assembly Latch

Removing and Replacing Parts 37
6Disconnect the bottom flex cable connector from the inverter
connector by pulling straight up on the attached pull tab.
7Remove the tape that covers the display panel connector.
8Pull the top flex cable connector down and away to remove it from the
display panel connector.
Display Assembly Latch
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
Display Assembly Latch for 14.1-Inch XGA Display Panels
Removing the Display Assembly Latch
1Remove the hard drive.
2Remove the display assembly.
3Remove the display assembly bezel.
M2.5 x 5-mm
screws (2)
display assembly latch