8Verify that the PC Card ejectors do not extend from the PC Card slot.
9Turn the computer over, and remove the six M2.5 x 5-mm screws labeled with a "circle B" that secure the system board assembly to the bottom case assembly.
10Remove the three M2.5 x 5-mm screws labeled with a "circle B" that secure the fan guard to the bottom case assembly. The fan guard is located on the right of the bottom case assembly.
S y s t e m B o a r d A s s e m b l y
M2.5 x 5-mm screw
11Turn the bottom case assembly over and remove the M2.5 x 5-mm screw, which is identified by a white "circle B" and arrow on a red label attached to the top of the battery connector on the front center of the system board.
12Remove the speakers from the bottom case assembly.
Removing and Replacing Parts
