Dell C600 Replacing the Display-Assembly Top Cover, Replacing the 12.1-Inch Display Panel

7Lift up the right side of the display panel, and pull the panel out of the display-assembly top cover at an angle.

Replacing the Display-Assembly Top Cover

If you are replacing the display-assembly top cover, remove the support bracket.

1Remove the two M2 x 4-mm screws on the left side of the display-assembly top cover and the two M2 x 4-mm screws on the right side of the display-assembly top cover.

2Lift the support bracket out of the display-assembly top cover.

Replacing the 12.1-Inch Display Panel

1Place the left edge of the display panel against the left side of the support bracket in the display-assembly top cover, and elevate the right side of the panel with your hand.

2Lay the display panel into the display-assembly top cover.

3Reinstall the four M3 x 3-mm screws that secure the display panel to the support bracket.

Removing and Replacing Parts

35