w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Removing the Display-Feed Flex Cable (14.1-Inch Display Panel)

D i s p l a y - Fe e d F l ex C a b l e

display panel connector

top flex cable connector

pull tab

bottom flex cable connector

inverter connector

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1Remove the hard drive.

2Remove the display assembly.

3Remove the display assembly bezel.

4Remove the tape that covers the display panel connector.

5Pull the top flex cable connector down and away to remove it from the display panel connector.

32

Removing and Replacing Parts

Page 32
Image 32
Dell C600 service manual Removing the Display-Feed Flex Cable 14.1-Inch Display Panel, S p l a y Fe e d F l ex C a b l e