Removing the Hybrid Cooling Fan

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

1Remove the hard drive.

2Remove the keyboard assembly.

3Remove the display assembly.

4Remove the palmrest assembly.

5Remove the thermal cooling assembly.

6Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that secure the hybrid cooling fan to the system board.

7Disconnect the fan power cable from the system board interface connector and remove the hybrid cooling fan.

NOTE: The fan power cable is long, and can be pulled out from under the EMI shield to provide access to the connector.

NOTICE: Do not block the keyboard screw hole when reinserting the fan cable.

Dell C600 service manual Removing the Hybrid Cooling Fan