Dell E6400 XFR service manual Doors, Removing Media Bay Door, Replacing Media Bay Door

Dell™ Latitude™ E6400 XFR Service Manual

NOTICE: Image above has palm rest removed to show tab socket close-up. During installation, verify handle pinions are inserted into the tab sockets properly during reassembly.

2.Replace the four M2.5 x 8-mm bottom retaining screws.

3.Replace the six M2.5 x 8-mm palm rest retaining screws.

4.Follow the procedures in After Working on Your Computer.

37 Doors

37.1 Removing Media Bay Door

PartsLocation

1

2

1 Media bay door 2 M3 x 3 mm screws (3)

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

1.Follow the procedures in Before Working on Your Computer.

2.Open the door to relieve hinge pressure.

3.Remove the three M3 x 3-mm screws from the bottom of the base assembly

37.2Replacing Media Bay Door

1.Insert door hinge onto assembly and align the hinge divots.

Page 66