Cabling One iSCSI SAN-Attached Cluster to a DellEMC AX4-5i Storage System

1Connect cluster node 1 to the iSCSI network.

a Connect a network cable from iSCSI NIC 0 (or NIC port 0) to the network switch 0 (sw0).

b Connect a network cable from iSCSI NIC 1 (or NIC port 1) to the network switch 1 (sw1).

2Repeat step 1 for each cluster node.

3Connect the storage system to the iSCSI network.

a Connect a network cable from the network switch 0 (sw0) to SP-A iSCSI port 0.

b Connect a network cable from the network switch 0 (sw0) to SP-B iSCSI port 1.

c Connect a network cable from the network switch 1 (sw1) to SP-A iSCSI port 1.

d Connect a network cable from the network switch 1 (sw1) to SP-B iSCSI port 0.

Cabling Your Cluster Hardware

23

Page 23
Image 23
Dell EMC AX4-5I manual Cabling Your Cluster Hardware