Back to Contents Page
I/O Board
Dell™ OptiPlex™ FX160/160 Service Manual
Removing the I/O Board
Replacing the I/O Board
Removing the I/O Board
1.Perform the procedure in Before Working on Your Computer.
2.Remove the two screws that secure the I/O board to the chassis.
1 | screws (2) | 2 | cable guide |
3.Carefully lift the I/O board out of the computer, ensuring the three cables are clear of the cable guide.
4.Disconnect the three cables (Audio, USB and Front Panel) from the I/O board.
Replacing the I/O Board
1. Connect the three I/O board cables (Audio, USB, and Front Panel) to the I/O board.
1 | front panel connector | 2 | audio connector |
|
|
|
|
3 | USB connector | 4 | I/O board |
|
|
|
|
2.Place the cables under the cable guide metal tab, and align the holes in the I/O board with the screw holes on the chassis, ensuring that the middle of the I/O board rests in the metal clip.
3.Secure the I/O board to the chassis with two screws.
