Dell GX1 P manual Use by, Resource

7DEOH￿%￿￿￿￿￿&RQILJXUDWLRQ￿8WLOLW\￿0HVVDJHV￿￿FRQWLQXHG￿

0HVVDJH 3UREDEOH￿&DXVH &RUUHFWLYH￿$FWLRQ

The ICU detects a	You added or modified a
resource conflict	card that now requires a
between this card	resource value already
and	in use by
conflicting_card.	conflicting_card.
The conflicting
resource was:
resource.

Try each of the following options until the problem is resolved:

‡Modify the card you are adding so that it uses a different value for resource. See “Modify- ing a Card” in Chapter 3 for instructions.

‡Modify conflicting_card so that it uses a different value for resource. See “Modifying a Card” in Chapter 3 for instructions.

‡If conflicting_card is not the system board, remove it from the computer. See “Removing a Card” in Chapter 3 for instructions.

‡Remove all expansion cards from the ICU, and then add them back one at a time, beginning with the new card and resolving resource con- flicts as they arise. See “Removing a Card” and “Adding a Listed Card” or “Adding an Unlisted Card” in Chapter 3 for instructions.

‡If you cannot resolve the resource conflict by any of the preceding methods, remove the new card. If you were modifying an existing card, reset the modified card to its previous resource value.

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User’s Guide.

B-4 Dell OptiPlex GX1 and GX1p Mini Tower Managed PC Systems Reference and Installation Guide