5Dock the computer to the docking device as follows:

D o c k i n g t h e C o m p u t e r

docking connector

alignment rails (2)

aHorizontally center the computer on the docking device platform, with the back of the computer facing the docking device docking connector, as shown in “Docking the Computer.”

bSlide the computer toward the connector until you feel the grooves on the bottom of the computer engage with the alignment rails.

NOTICE: If you attempt to push the computer all the way into the docking device without engaging the alignment rails, you may irreparably damage the docking connector on the computer.

NOTICE: Do not pick up the computer or the docking device separately when they are connected because you may damage the connectors on the computer and the docking device.

NOTICE: If you are using a monitor with the monitor stand, remove the monitor from the stand before moving the docking control base into place.

cGently push the computer forward until the docking connector is fully engaged.

System Information Guide

15

Page 17
Image 17
Dell PDX manual Dock the computer to the docking device as follows, C k i n g t h e C o m p u t e r