Docking for the First Time With Windows

16Select the name of your network interface controller (NIC) from the drop-down menu.

17Select whether the network adapter should obtain an IP address from a server, or whether an IP address is specified.

If you do not know what to select, see your system administrator.

18Follow the prompts to complete the installation.

The Windows desktop appears and the installation is complete.

The computer cannot enter suspend-to-disk mode while docked.

Docking for the First Time With Windows 98

1Dock and turn on your computer.

2Either press <F2> during the system boot routine, or press <Fn><F1> after your computer boots to view the system setup program.

3Set Docking IRQ to Optimized.

4Set Universal Connect to Enabled.

5Exit the system setup program.

6If the Configuration Setup window appears, click OK. The Add New Hardware Wizard appears.

7Click Next.

8Select Search for the Best Driver for Your Device (Recommended) and click Next.

9Remove the check-mark next to each option and click Next.

A window appears, indicating that Windows is ready to detect the best driver for your device.

10Follow the prompts on the Add New Hardware Wizard.

11Whenever prompted, select Search for the Best Driver for Your Device (Recommended) and click Next.

12Continue to follow the prompts to complete the installation.

The Windows desktop appears and the installation is complete.