Dell PDX manual Removing and Installing a PCI Expansion Card

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Re p l a c i n g t h e B a t t e r y

battery

socket

battery

expansion-card slots (2)

battery securing tab

5Slightly lift up the battery securing tab and remove the battery from the battery socket.

6Orient the new battery with the side labeled “+” facing up. Then insert the battery into the socket and release the securing tab.

Do not dispose of this battery along with household waste. Contact your local waste disposal agency for the address of the nearest battery deposit site.

Removing and Installing a PCI Expansion Card

To install a Peripheral Component Interconnect (PCI) expansion card in the docking device, perform the following steps.

NOTE: Install 3.3-volt (V) or 5-V PCI expansion cards no longer than 10 inches (25.4 centimeters [cm]) in the top slot and install 3.3-V or 5-V PCI expansion cards no longer than 6.9 inches (15.5 cm) in the bottom slot.

NOTICE: Do not touch or handle anything inside the docking device except those objects mentioned in the following procedure. If you touch other objects, you may damage the docking device, and may void your warranty.

24

System Information Guide