Dell PDX manual PCI expansion-slot door

1Save all files, close and exit all application programs, and exit the operating system.

2Turn off the computer.

3Remove the monitor from the monitor stand. Remove the monitor stand from the docking device.

4Undock your computer and leave the eject/locking lever in the unlocked position.

5Detach all cables—including the AC adapter cable—from the docking device. Make sure the eject/locking lever is not in the back/locking position.

6Press the latch on the PCI expansion-slot door and remove it. See the following figure.

P C I E x p a n s i o n - S l o t D o o r a n d E x p a n s i o n - C a r d C o n n e c t o r

PCI expansion-slot door

7Remove the top cover by pressing the two side buttons and rotating the cover toward the back of the docking device. Once the cover is rotated back, disengage the hinge tabs from the back of the docking device, and fully remove the top cover.

See the figure “Removing the Top Cover.”

System Information Guide

25